Floor sealing
Required DURABASE WS products
Self-adhesive wall sealing set for dry sealing walls and floors.
1 Sealing membrane 1 m x 30 m; 2 Spray primer; 3 Corner adhesive tape 120 mm x 50 m; 4 Plinth sealing tape 50 m; 5 Installation aid: squeegee; 6 2x wall sleeves 1/2″; 7 Drip protection sleeve; 8 Installation instructions.
Floor sealing
Domestic bathroom with bathtub and walk-in shower
1. glue the inside corner into the corner, see picture B 2 – B 6.
2. bevel the skirting sealing tape in the area of the inside corner to 45° with a cutter or scissors (miter).
3 . peel back the protective film a little, fold up the sides of the fleece strip 90° towards the wall and apply the tape in the inside corner.
4 . remove the remaining protective film and press on the base sealing tape with a spatula.
5. cut off the protruding inner corner at the top parallel to the skirting sealing tape using the cutter.
6. slightly peel off the protective film at the start of the sealing strip. Apply the sealing membrane to the fleece-free strip of the skirting sealing tape, starting in the corner.
7. remove the remaining protective film and press the sealing membrane firmly onto the floor.
8. place the sealing strips continuously on the fleece-free edge strip.
